Muyee Fine Ceramics

Straight hole nozzle

Sheathed Straight Hole Nozzle Straight hole nozzles are characterized by their simple structure, consisting only of a converging section and a straight section. These nozzles suffer from issues such as inlet region vortices, high pressure losses, and low exit velocity; the exit jet velocity is as low as 50% of that of a Venturi nozzle. Straight hole nozzles are typically used in sandblasting machines with low jet intensity and narrow enclosed structures. BR-SB series straight hole nozzles offer threaded and flanged connections for less demanding open sandblasting processes. Nozzle Material: Boron Carbide/Tungsten Carbide/Silicon Carbide Sheath: Aluminum/Steel/Polyethylene 2" Coarse Thread, Inlet Size: 32mm 1-1/4" Fine Thread, Inlet Size: 25mm Long Straight Hole Nozzle Made of Boron Carbide (B4C) or Tungsten Carbide (TC). Silicon Carbide (SiC)ModelOrificeLengthConnection Thread SpecificationBR-SBB-33/16"(4.8mm)130 mm1-1/4"NPSM; G1-1/4"; 2" UNCBR-SBB-41/4″ (6.4mm)130 mm1-1/4"NPSM; G1-1/4"; 2" UNCBR-SBB-55/16″(7.9mm)150 mm1-1/4"NPSM; G1-1/4"; 2" UNCBR-SBB-63/8″ (9.5mm)170 mm1-1/4"NPSM; G1-1/4"; 2" UNCBR-SBB-77/16″(11.1mm)200 mm1-1/4"NPSM; G1-1/4"; 2" UNCBR-SBB-81/2″ (12.7mm)220 mm1-1/4"NPSM; G1-1/4"; 2" UNCStraight Hole Nozzle  The material can be boron carbide/tungsten carbide/silicon carbide.Dimensions (length/outer diameter/inner diameter) and protective sheath can be customized.Inner Hole SizeODOuter DiameterNote2mm-12.7mm20mm10-25mmSpecial sizes can be customized according to customer requirementsFrom 1/4″ (6.4mm)-1/2″ (12.7mm)CustomizedCustomizedFrom 1/4″ (6.4mm)-1/2″ (12.7mm)Customized and FlangedCustomized  

Single Venturi Nozzle

Compared to straight-hole nozzles, single venturi nozzle have better aerodynamic performance, stronger vortex improvement, and lower pressure loss. This type of nozzle can improve the momentum of the abrasive, increase the impact energy, and improve the cleaning effect. This series is widely used in sandblasting processes where long sandblasting distances, large cleaning areas, and high impact forces are required. Type: Venturi Nozzle  Application: Mobile Sandblaster Thread Specification: 1-1/4''NPSM, G1-14'', 2'' 4-1/2 UNC  ID: 1/4"-1/2" (6.4 mm - 12.7 mm)  OD: 1-5/8" (42 mm)  Length: 130 mm - 210 mm Product Dimensions BR-VSA/B Series Single-Inlet Nozzle Series Inner Diameter Outer Diameter Length BR-VSA/B-4 1/4″(6.4mm) 1 - 5/8″(36mm) 130mm BR-VSA/B-5 5/16″(7.9mm) 1 - 5/8″(36mm) 150mm BR-VSA/B-6 3/8″(9.5mm) 1 - 5/8″(36mm) 170mm BR-VSA/B-7 7/16″(11.1mm) 1 - 5/8″(36mm) 200mm BR-VSA/B-8 1/2″(12.7mm) 1 - 5/8″(36mm) 210mm   Comparison of Single-Inlet and Double-Inlet Nozzles Characteristics Single-Inlet Venturi Nozzle Double-Inlet Nozzle Inlet 1 (Main Air Inlet) 2 (Main Air Inlet + Secondary/Auxiliary Air Inlet) Acceleration Mechanism Acceleration solely relies on the Venturi effect of the main airflow. Main airflow + secondary airflow secondary impact acceleration in the throat/diffusion section Sandblasting Media Velocity Relatively high Relatively low Efficiency General Very high Induction Capacity General, easily affected by abrasive type/sand pipe length Strong and stable, not easy to clog Air Consumption Same Same Cost Lower Higher Usage Scenarios Severely rusted surfaces requiring deep processing Generally rusted surfaces requiring large-area sandblasting

Double Venturi Nozzle

The "dual air intake" design of the sandblasting nozzle introduces a second (auxiliary) compressed air stream to impact and accelerate the abrasive in the critical throat or diffusion section, significantly improving the final ejection speed, efficiency, abrasive entrainment capacity, and stability of the abrasive. It is a powerful tool for pursuing ultimate productivity and handling high-difficulty tasks. However, this performance improvement comes at the cost of higher compressed air consumption, equipment cost, and system complexity. Users need to weigh these factors based on their specific job requirements (efficiency requirements, substrate hardness, abrasive type, budget, air compressor capacity). For professional sandblasting operations requiring maximum efficiency and handling challenging conditions, dual air intake nozzles are usually a worthwhile investment.

Wet Spray Nozzle

Wet nozzles are core components that accelerate and focus water (or a mixture of water and abrasives) into a high-speed jet. Through kinetic impact, they achieve cleaning, rust removal, surface treatment, and other functions, effectively reducing dust pollution during sandblasting.